Router Setup
20
N150 WiFi Router (N150R)
Internet Setup (Basic Settings)
The Basic Settings screen displays when you select No. I want to configure the Router
myself in the Setup Wizard and is also available from the router menu. It is where you view or
change ISP information. The fields that display vary depending on whether your Internet
connection requires a login.
To manually set up the Internet connection:
1. Select Setup > Internet,
2. Select Yes or No depending on whether your ISP requires a login.
• Ye
s. Select the encapsulation method and enter the login name. If you want to
change the login time-out, enter a new value in minutes.
• No.
Enter the account and domain names, as needed.
3. Ent
er the settings for the IP address and DNS server. The default DSL settings usually work
fine. If you have problems with your connection, check the ISP settings.
4. If no login is required, you can specify the MAC
Address setting.
5. Click Ap
ply to save your settings.
6. Click Te
st to test your Internet connection. If you are not able to connect within 1 minute,
and see Chapter 7, Troubleshooting.
The following descriptions explain all of the possible fields in t
he Basic Settings screen. The
fields that display in this screen depend on whether an ISP login is required.
Does Your ISP Require a Login? Answer either yes o
r no.
• Wh
en no login is required, these fields display:
To Next Page
Loading...
Need help?
General
