Security Settings
40
N150 WiFi Router (N150R)
Set the Time Zone
The router uses the Network Time Protocol (NTP) to obtain the current time and date from
one of several network time servers on the Internet.
To set the time zone:
1. Select Secu
rity > Schedule.
2. Select your time zone. This setting determines the blocking schedule and time-stamping of
log entries.
3. If your time zone is in daylight savings time, select the Adjust for da
ylight savings time
check box to add one hour to standard time.
Note: If your region uses daylight savings time, select Adjust for daylight
sa
vings time on the first day and clear it after the last day.
4. Click Ap
ply to save your settings.
To Next Page
Loading...
Need help?
General
