NETGEAR N450 WNR2500 - Attached Devices and Access Control

genie BASIC Settings
34
N450 Wireless Router WNR2500
b. Click the Generate button.
For 64-bit WEP, four different WEP keys are generated. For 128-bit WEP, only
one WEP key is generated, and the four key fields are populated with the same
WEP key
.
• If the authentication type is Shared Key:
a. Specify the active key by selecting the Key 1, Key 2, Key 3, or Key 4 radio
button.
b. Enter the value for the key manually:
- For 64-bit WEP
, enter 10 hexadecimal digits (any combination of 0–9, A–F).
The key values are not case-sensitive.
- For 128-bit WEP
, enter 26 hexadecimal digits (any combination of 0–9, A–F).
The key values are not case-sensitive.
6. Click the Apply button.
Attached Devices
This screen displays all of the computers and devices that are currently connected to your
wired and wireless networks.
View the Attached Devices
Both authorized and unauthorized users (intruders) display. Wired devices are connected to
the router through Ethernet cables. Wireless devices have joined the wireless network.
 To view the devices that are connected to your networks:
1. Select BASIC > Attached Devices.