Advanced Settings
78
N450 Wireless Router WNR2500
Advanced Wireless Settings
You can configure advanced settings for your wireless network. You can also set up a
schedule to turn off your wireless network, configure the WPS settings, and set up an access
list for wireless clients.
Advanced Settings for Your Wireless Network
NETGEAR recommends that you use caution when changing these settings.
To change advanced settings for your wireless network:
1. Select ADVANCED >
Advanced Setup > Wireless Settings.
A screen similar to the following displays:
2. To completely turn off the wireless radio of the router, clear the Enable Wireless Router
Radio check box.
When the wireless radio is disabled, you can still use the router by connecting computers
to the router with an Ethernet cable. By default, the wireless radio is enabled.
3. To increase the wireless speed to the maximum supported speed, clear the
Enable 20/40
MHz Coexistence check box.
By default, 20/40-MHz coexistence is enabled to prevent interference between wireless
networks in your environment at the expense of the wireless speed. If no other wireless
networks exist in your environment, you can clear the Enable 20/40 MHz Coexistence
check box.
To Next Page
Loading...
