NETGEAR N450 WNR2500 - Configuration File Management

Administration
74
N450 Wireless Router WNR2500
The Logs screen shows the following information:
• Date and time.
The date and time the log entry was recorded.
• Source IP.
The IP address of the initiating device for this log entry.
• T
arget address. The name or IP address of the website or news group that users
visited or attempted to access. Also, the IP address from which a DoS or port scan
was initiated, from which time was synchronized, or in relation to which other actions
occurred.
• Action.
The action that occurred.
2. Select any of the following check boxes:
• Attempted access to allowed sites. Log attempts to access websites that are
allowed.
• Attempted access to blocked sites and services. Log attempts to access websites
and services that are blocked.
• Connections to the W
eb-based interface of this Router. Log access to the router
user interface.
• Router operation (startup, get time, and so on). Log router operation events such
as startup, Internet connection, firmware initialization, and time synchronization.
• Known DoS attacks and Port Scans. Log DoS attacks and port scans.
• Port Forwarding / Port T
riggering. Log port forwarding and port triggering events.
• W
ireless access. Log access by wireless clients.
• T
urn off wireless signal by schedule. Log when the radio is turned off when the
wireless signal is scheduled to be turned off.
3. T
o refresh the log screen, click the Refresh button.
4. T
o clear the log entries, click the Clear Log button.
5. T
o email the log immediately, click the Send Log button.
6. Click the Apply button.
Manage the Configuration File
The configuration settings of the router are stored within the router in a configuration file. You
can back up (save) this file to your computer, restore it, or reset it to the factory default
settings.
Back Up Settings
 To back up the router’s configuration settings:
1. Select ADV
ANCED > Administration > Backup Settings.