genie ADVANCED Home
45
N450 Wireless Router WNR2500
The Setup Wizard searches your Internet connection for servers and protocols to
determine your ISP configuration. When the Setup Wizard is successful, the following
screen displays:
WPS Wizard
The WPS Wizard helps you add a WPS-capable client (a computer or other wireless device)
to your network. On the client, you must either press its WPS button or locate its WPS PIN.
To use the WPS Wizard:
1. Select ADVANCED > WPS W
izard.
The Add WPS Client screen displays.
2. Click the Next button.
The screen that displays lets you select the method for adding the client:
3. Select one of the following radio buttons:
• Push Button. To use the push-button method, do the following:
a. Either click the
WPS radio button on this screen, or press the WPS button that is
on the front panel of the router (see Front Panel on page 9).
b. Within two minutes, go to the client and press its WPS button to let the client join
the network.
You do not need to enter a password.
To Next Page
Loading...
