NETGEAR Nighthawk 5G User Manual

2.
To turn the WiFi signal on or off:
a.
Tap the WiFi button.
The WiFi screen displays.
b.
Tap the Options button.
The WiFi Options screen displays.
c.
Tap the WiFi Options button.
A message displays to tell you that changing the wiFi info temporarily causes
connectivity loss.
d.
Tap the OK button.
Your settings are saved.
3.
To power down the WiFi radio after a set period of inactivity:
a. Tap the WiFi button.
The WiFi Options screen displays.
b.
Tap the Options button.
The WiFi Options screen displays.
c.
Tap the WiFi Standby button.
The WiFi Standby screen displays.
d.
Tap the radio button for the selection that you want.
Your settings are saved.
Use the mobile hotspot web page to set up a profile that is more detailed than the
basic profiles offered on the mobile hotspot.
Change WiFi Settings From the Mobile Hotspot Web Page
To select a WiFi profile or create a custom profile on the mobile hotspot web page:
1. From a computer or WiFi device that is connected to the mobile hotspot, launch a
web browser.
2.
Enter http://192.168.1.1:8080/ or http://192.168.2.1:8080.
The mobile hotspot web page displays.
3. Enter the administrator login password.
The default password is attadmin. The password is case-sensitive.
The home page displays.
User Manual31Use Your Mobile Hotspot
Nighthawk 5G Mobile Hotspot

NETGEAR Nighthawk 5G Specifications

General

5G Compatibility	Yes
Beamforming	Yes
SIM Card	Nano SIM
WiFi Technology	Wi-Fi 6 (802.11ax)
Antenna	Internal Antennas
Display	2.4" Color LCD Panel
Security	WPA3
5G Bands	n2, n5, n41, n66, n71, n77, n78
Memory	512MB