NETGEAR Nighthawk 5G - Set Up Your Mobile Hotspot

Status LED
The status LED indicates data connection status:
•
Blue, slow blink. The mobile hotspot is ready.
•
Blue, double-blink. The mobile hotspot is transferring data.
•
Red, slow blink. The mobile hotspot is not connected to the network.
Set Up Your Mobile Hotspot
The mobile hotspot comes with a preinstalled SIM card.
To set up your mobile hotspot:
1. Insert the battery.
2. Install the back cover.
3. Firmly close the back cover.
4.
Press the Power button to power on the mobile hotspot.
User Manual9Get Started
Nighthawk 5G Mobile Hotspot