NETGEAR Nighthawk 5G User Manual

View Alerts
Your mobile hotspot displays alerts to advise you of device status changes. See View
Messages From the Mobile Hotspot Web Page on page 19.
SIM Not Installed
Ensure that the micro SIM card is installed correctly. The mobile hotspot comes with a
preinstalled SIM. For information about replacing a SIM, see Replace a SIM Card on
page 10.
SIM Error — Check SIM
Ensure that your network service provider’s micro SIM card is inserted in the mobile
hotspot. If a problem still exists, contact customer service. The micro SIM card might
be damaged and need replacing.
SIM Locked
You can unlock the SIM.
To unlock the micro SIM card from the mobile hotspot web page:
1.
Contact customer service for the PIN to unlock the micro SIM card.
2. From a computer or Wi-Fi device that is connected to the mobile hotspot, launch a
web browser.
3.
Enter http://192.168.1.1:8080 or http://192.168.2.1:8080.
The mobile hotspot web page displays.
4. Enter the administrator login password.
The default password is attadmin. The password is case-sensitive.
The home page displays.
5. Enter the micro SIM PIN when prompted.
6.
Click the Save button.
Your settings are saved.
User Manual60Troubleshooting
Nighthawk 5G Mobile Hotspot

NETGEAR Nighthawk 5G Specifications

General

5G Compatibility	Yes
Beamforming	Yes
SIM Card	Nano SIM
WiFi Technology	Wi-Fi 6 (802.11ax)
Antenna	Internal Antennas
Display	2.4" Color LCD Panel
Security	WPA3
5G Bands	n2, n5, n41, n66, n71, n77, n78
Memory	512MB