NETGEAR Nighthawk 5G User Manual

Extend Battery Life
The mobile hotspot, by default, is configured to optimize battery life. The following
factors affect battery life:
•
Screen brightness.
•
Standby time.
•
Data throughput.
•
Mobile broadband signal strength (the better the signal, the longer the battery life).
•
Wi-Fi range.
To extend the battery life, use any of the following methods:
•
Adjust Wi-Fi settings.
•
Adjust display settings.
•
Use tethered USB.
Adjust Wi-Fi Settings to Optimize Battery Life
If the devices that you are connecting to your Wi-Fi network are always close to your
mobile hotspot, shorten the Wi-Fi range. Set the standby timer to a shorter period to
minimize the wait time when no devices are connected to either Wi-Fi network before
going into standby mode (the Wi-Fi radios turn off).
Note: When you change the Wi-Fi settings, any devices connected to the mobile hotspot
are disconnected and might need to be reconnected.
You can set the following Wi-Fi options to optimize battery life:
•
Adjust the display settings. See Set the Display to Increase Battery Life From the
Mobile Hotspot Web Page on page 41.
•
Set the Wi-Fi range to Standard, not Extended, and set the Wi-Fi standby to 5 minutes.
Set the Display to Increase Battery Life From the Mobile
Hotspot
Dim the screen to reduce the LCD screen’s brightness level. Set the screen time-out to
a shorter period to reduce the amount of time the mobile hotspot waits without the
LCD screen being touched before the screen turns blank.
User Manual40Maintain Your Mobile Hotspot
Nighthawk 5G Mobile Hotspot

NETGEAR Nighthawk 5G Specifications

General

5G Compatibility	Yes
Beamforming	Yes
SIM Card	Nano SIM
WiFi Technology	Wi-Fi 6 (802.11ax)
Antenna	Internal Antennas
Display	2.4" Color LCD Panel
Security	WPA3
5G Bands	n2, n5, n41, n66, n71, n77, n78
Memory	512MB