NETGEAR Nighthawk 5G User Manual

Temperature-Related Alerts
The mobile hotspot is designed to work over a wide temperature range. (For more
information, see Environmental Specifications on page ?.) The mobile hotspot shuts
down automatically if it goes out of the supported temperature range.
Move the device to an area where the temperature is more suitable and, if the mobile
hotspot is too warm, make sure that the area is well ventilated and air can circulate
around the device.
Note: The battery might not recharge if the mobile hotspot is outside the operating
temperature range.
Reset the Mobile Hotspot
You can reset the mobile hotspot to the factory settings. This is useful if you forgot your
attadmin login password for the mobile hotspot web page.
If you reset the mobile hotspot, all of your customizations are lost. If you want to keep
them, save them before doing the reset and restore them afterward. See Back Up and
Restore Mobile Hotspot Settings on page ?.
Note: When you reset the mobile hotspot, any currently connected devices lose access
and must be reconnected after the mobile hotspot restarts.
Reset the Mobile Hotspot From the Mobile Hotspot
Start with the mobile hotspot turned on.
To reset the mobile hotspot directly from the mobile hotspot:
1.
Press the Power button to wake the device.
User Manual61Troubleshooting
Nighthawk 5G Mobile Hotspot

NETGEAR Nighthawk 5G Specifications

General

5G Compatibility	Yes
Beamforming	Yes
SIM Card	Nano SIM
WiFi Technology	Wi-Fi 6 (802.11ax)
Antenna	Internal Antennas
Display	2.4" Color LCD Panel
Security	WPA3
5G Bands	n2, n5, n41, n66, n71, n77, n78
Memory	512MB