Specify Your Internet Settings
22
Nighthawk AC1900 WiFi Cable Modem Router
To specify the Internet connection settings:
1. Launch an Internet browser from a computer or wireless device that is connected to the
network.
2. T
ype http://www.routerlogin.net or http://www.routerlogin.com.
A login screen displays.
3. Enter the modem router user name and password.
The user name is admin.
The default password is password. The user name and
password are case-sensitive.
The BASIC Home screen displays.
4. Select ADV
ANCED > Setup > Internet.
Scroll to
view more
settings
5. If your Internet connection requires an account name or host name, type it in the Account
Name (If Required) field.
6. If your Internet connection requires a domain name, type it in the Domain Name (If
Required) field.
For the other sections in this screen, the default settings usually work, but you can
change them.
7. For the Internet IP
Address setting, select one of the following radio buttons:
• Get Dynamically from ISP.
Your ISP uses DHCP to assign your IP address. Your ISP
automatically assigns these addresses.
• Use Static IP
Address. Enter the IP address, IP subnet mask, and the gateway IP
address that your ISP assigned. The gateway is the ISP modem router to which your
modem router connects.
8. For the Domain Name Server (DNS) Address setting, select one of the following radio
buttons:
To Next Page
Loading...
