Share a USB Printer
50
Nighthawk AC1900 WiFi Cable Modem Router
Install the Printer Driver and Cable the Printer
Some USB printer manufacturers (for example, HP and Lexmark printers) request that you
do not connect the USB cable until the installation software prompts you to do so.
To install the driver and cable the printer:
1. On each computer on your network that shares the USB printer
, install the driver
software for the USB printer.
If you do not have the printer driver, contact the printer manufacturer.
2. Use a USB printer cable to connect the USB printer to the modem router USB port.
USB port
Download the ReadySHARE Printer Utility
The utility works on Windows and Mac computers.
To download the utility:
1. V
isit www.netgear.com/readyshare.
2. Scroll down to the Print From the Comfort of
Your Home Network section at the bottom of
the screen.
3. Click one of the following links.
• Download PC installer and get started.
This is the utility for Windows computers.
• Download Mac installer and get started.
This is the utility for MAC computers.
4. Follow the onscreen instructions to download the ReadySHARE Printer utility setup file and
install.
To Next Page
Loading...
Need help?
General
