Specify Network Settings
71
Nighthawk AC1900 WiFi Cable Modem Router
Enable or Disable the Wireless Radios
If you used the WiFi On/Off button to turn off the wireless radios, you can’t log in to the
modem router to turn them back on. You must press the WiFi On/Off button again for two
seconds to turn the wireless radios back on.
To enable or disable the wireless radios:
1. Launch an Internet browser from a computer or wireless device that is connected to the
network.
2. T
ype http://www.routerlogin.net or http://www.routerlogin.com.
A login screen displays.
3. Enter the user name and password.
The user name is admin.
The default password is password. The user name and
password are case-sensitive.
The BASIC Home screen displays.
4. Select ADV
ANCED > Advanced Setup > Wireless Settings.
5. Select or clear the Enable Wireless Gateway Radio check boxes in the 2.4 GHz and 5
GHz sections of the screen.
Clearing this check box turns off the WiFi feature of the modem router.
6. Click the Apply button.
If you turned off both wireless radios, the WiFi On/Off LED and the WPS LED turn off. If
you turned on the wireless radios, the WiFi On/Of
f LED and the WPS LED light.
To Next Page
Loading...
Need help?
General
