Specify Your Internet Settings
23
Nighthawk AC1900 WiFi Cable Modem Router
• Get Automatically from ISP. Your ISP uses DHCP to assign your DNS servers. Your
ISP automatically assigns this address.
• Use These DNS Servers. If you know that your ISP requires specific servers, select
this option. Enter the IP address of your ISP’
s primary DNS server. If a secondary
DNS server address is available, enter it also.
9. Click the Apply button.
Your settings are saved.
If the NETGEAR website does not display within one minute, see Chapter 10,
Troubleshooting.
Specify an IPv6 Internet Connection
To specify an IPv6 Internet connection:
1. Launch an Internet browser from a computer or wireless device that is connected to the
network.
2. T
ype http://www.routerlogin.net or http://www.routerlogin.com.
A login screen displays.
3. Enter the modem router user name and password.
The user name is admin.
The default password is password. The user name and
password are case-sensitive.
The BASIC Home screen displays.
4. Select ADV
ANCED > Advanced Setup > IPv6.
If your Internet provider supports IIPV6, the System Delegated Prefix field displays IPv6
information.
5. Specify how the modem router assigns IPv6 addresses to the devices on your home
network (the LAN) by selecting one of the following radio buttons:
To Next Page
Loading...
Need help?
General
