NETGEAR Nighthawk X8 5 - Page 61

3. Enter the router user name and password.
The user name is admin.The default password is password.The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Advanced Setup > Wireless Settings.
The Wireless Settings page displays.
5. Scroll down below the WPS Settings section and select or clear the Enable Implicit BEAMFORMING check
box.
6. Click the Apply button.
Your settings are saved.
Tri-Band WiFi Connections
61
Nighthawk X8 AC5300 Tri-Band WiFi Router