6.
When the router receives an IP address dynamically, you can perform the following
actions:
•
Release: Click the Release button to terminate the DHCP IP address, that is,
terminate the Internet connection.
•
Renew: Click the Renew button to renew the DHCP IP address, that is, renew
the Internet connection.
7. To close the window, click the Close Window button.
Display port and radio statistics
To display port and radio statistics:
1.
Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2. Enter orbilogin.com.
A login window opens.
3. Enter the admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Click the ADVANCED tab.
5. In the Internet Port pane, click the Show Statistics button.
The Show Statistics window displays and shows following information:
•
System Up Time: The time elapsed since the router was last restarted.
•
Port: The statistics for the WAN (Internet) and LAN (Ethernet) ports, the WiFi
radios (indicated as WLANs in the window), and the WiFi backhaul connection
(indicated as the WLAN Backhaul in the window) between the router and the
satellite. For each port and radio, and for the backhaul connection, the window
displays the following information:
-
Status: The link status of the port.
-
TxPkts: The number of packets transmitted on this port since reset or manual
clear.
-
RxPkts: The number of packets received on this port since reset or manual
clear.
-
Collisions: The number of collisions on this port since reset or manual clear.
User Manual160Manage and Monitor Your Orbi
Pro System
Orbi Pro WiFi 6 AX6000 Router Model SXR80 and Orbi Pro WiFi 6 AX6000 Satellite Model SXS80
To Next Page
Loading...
Need help?
General
