NETGEAR Orbi Pro WiFi 6 AX6000 User Manual

The router’s bar LED turns off after about three minutes.
Place your Orbi Pro WiFi 6 satellite
Your satellite must be within range of your router’s WiFi signal in order for it to sync with
the router. Use the satellite’s bar LED to help you determine where to place your satellite.
Sync your Orbi Pro WiFi 6 satellite
The sync process for your Orbi Pro WiFi 6 satellite depends on whether your satellite
came with your Orbi Pro WiFi 6 system, or if your satellite is an add-on satellite.
Sync a satellite from an Orbi Pro WiFi 6 system
The Orbi Pro WiFi 6 System includes an Orbi Pro WiFi 6 router and a Orbi Pro WiFi 6
satellite. The Orbi Pro WiFi 6 satellite that is packaged with an Orbi Pro WiFi 6 router is
preset to automatically find and sync to the router’s WiFi signal.
To sync your Orbi Pro WiFi 6 satellite:
1. Place your satellite.
For more information, see Place your Orbi Pro WiFi 6 satellite on page 21.
2. Connect the satellite to a power source.
The satellite bar LED pulses white. The satellite automatically finds the router’s WiFi
signal and attempts to sync to the Orbi Pro WiFi 6 router.
User Manual21Overview and Setup
Orbi Pro WiFi 6 AX6000 Router Model SXR80 and Orbi Pro WiFi 6 AX6000 Satellite Model SXS80

NETGEAR Orbi Pro WiFi 6 AX6000 Specifications

General

MU-MIMO	Yes
OFDMA	Yes
Beamforming	Yes
VPN Support	Yes
Parental Controls	Yes
Guest Network	Yes
WiFi Technology	802.11ax
Coverage	Up to 6, 000 sq ft
Frequency Bands	2.4GHz, 5GHz
Antenna	Internal antennas
Security	WPA3
Ethernet Ports	4 x 1G LAN, 1 x 2.5G WAN