NETGEAR Orbi Pro WiFi 6 AX6000 User Manual

NTP server
By default, the router uses the NETGEAR Network Time Protocol (NTP) server to sync
the network time. You can change the NTP server to your preferred NTP server.
To change the NTP server to your preferred NTP server:
1.
Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2. Enter orbilogin.com.
A login window opens.
3. Enter the admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Administration > NTP Settings.
The NTP Settings page displays.
5.
Select the Set your preferred NTP server radio button.
6.
Enter the NTP server domain name or IP address in the NTP server field.
7. Click the Apply button.
Your settings are saved.
Time zone
To set your time zone manually:
1.
Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2. Enter orbilogin.com.
A login window displays.
If your browser does not display a login window but displays a security warning and
does not let you proceed, see What to do if you get a browser security warning on
page 33.
3. Enter the admin user name and password.
The user name is admin. The password is the one that you set the first time that you
logged in. The user name and password are case-sensitive.
User Manual169Manage and Monitor Your Orbi
Pro System
Orbi Pro WiFi 6 AX6000 Router Model SXR80 and Orbi Pro WiFi 6 AX6000 Satellite Model SXS80

NETGEAR Orbi Pro WiFi 6 AX6000 Specifications

General

MU-MIMO	Yes
OFDMA	Yes
Beamforming	Yes
VPN Support	Yes
Parental Controls	Yes
Guest Network	Yes
WiFi Technology	802.11ax
Coverage	Up to 6, 000 sq ft
Frequency Bands	2.4GHz, 5GHz
Antenna	Internal antennas
Security	WPA3
Ethernet Ports	4 x 1G LAN, 1 x 2.5G WAN