NETGEAR Orbi Pro WiFi 6 AX6000 User Manual

Factory settings
The following factory settings information are for the Orbi Pro WiFi 6 router (model
SXR80) and the Orbi Pro WiFi 6 satellite (model SXS80).
You can return the Orbi Pro WiFi 6 router or satellite to its factory settings. Use the end
of a paper clip or a similar object to press and hold the Reset button on the back of the
router or satellite for at least seven seconds. The router or satellite resets, and returns
to the factory settings.
Factory settings for Orbi Pro WiFi 6 router model SXR80
The following table shows the factory default settings for the Orbi Pro WiFi 6 router.
Table 9. Factory default settings for the router
Default SettingFeature
Router web interface login
orbilogin.comLogin URL
adminLoign user name (case-sensitive)
passwordDefault login password (case-sensitive)
Internet connection
Use default hardware addressWAN MAC address
1500WAN MTU size
AutoSensingPort speed
DisabledDMZ
GMT for WW, except NA and GR
GMT+1 for GR
GMT-8 for NA
Time zone
DisabledTime zone adjusted for daylight saving time
Local network 1 (LAN 1)
192.168.1.1LAN 1 IP
255.255.255.0LAN 1 subnet mask
EnabledLAN 1 DHCP server
192.168.1.2 to 192.168.1.254LAN 1 DHCP range
User Manual229Supplemental Information
Orbi Pro WiFi 6 AX6000 Router Model SXR80 and Orbi Pro WiFi 6 AX6000 Satellite Model SXS80

NETGEAR Orbi Pro WiFi 6 AX6000 Specifications

General

MU-MIMO	Yes
OFDMA	Yes
Beamforming	Yes
VPN Support	Yes
Parental Controls	Yes
Guest Network	Yes
WiFi Technology	802.11ax
Coverage	Up to 6, 000 sq ft
Frequency Bands	2.4GHz, 5GHz
Antenna	Internal antennas
Security	WPA3
Ethernet Ports	4 x 1G LAN, 1 x 2.5G WAN