24
/
7
T E C H N I C A L
S U P P O R T*
1-888-NETGEAR (638-4327)
Email: info@NETGEAR.com
ProSafe™ 8-Port Gigabit Smart Switch Data Sheet
GS108T
Power Up Your Small Network to Gigabit Speeds
Joining NETGEAR’s family of Gigabit Smart Switches with web-based management, this 8-port
Gigabit switch is high on value and capability. With 8 10/100/1000 Mbps ports and support for
Jumbo frames, capable of powering 2000 Mbps of data throughput in full-duplex mode, it is
ideal for small offices or extensions and connects high speed servers or power users. Ideal for
combining 10, 100, and 1000 Mbps devices it delivers automatic speed and full/half-duplex
sensing plus Auto Uplink™ on every port. In addition, an intuitive web-browser interface offers
the simple Smart Switch management, making it easy to configure ports and set up port trunks,
VLANs and traffic prioritization or monitor switch performance. Alternatively, use SNMP-based
software to manage your Smart Switch.
The GS108T is equipped with highly advanced features such as Access Control Lists (ACL),
802.1x port authentication, enhanced QoS, rate limiting and IGMP Snooping among others
to provide a small and medium-sized business with a network that is geared for growth while
providing scalability and reliability.
Enhanced Security
These switches also provide advanced features that provide more robust security to the SMBs.
These include:
• 802.1x for authentication, with Guest VLAN
• MAC-based port security
Enhanced Quality of Service
Priority queuing ensures high-priority traffic gets delivered efficiently, even during congestion
from high traffic bursts. Companies implementing network telephony or video conferencing,
for example, need to be able to prioritize such voice and video traffic and other real-time
applications over less latency-sensitive traffic to ensure reliability and quality. The ability to
prioritize traffic ensures quality of latency-sensitive services and applications despite increasing
traffic loads. The ProSafe GS108T provides several advanced QoS features:
• 802.1p based prioritization
• Layer 3-based (DSCP) prioritization
• Rate-limiting
“Smart” Management Features
Manage all ProSafe Smart Switches as from an easy-to-use Web console that can be used to
configure all features, as well as monitor and trouble-shoot. These switches also have SNMP
(v1, 2c) to collect and track data to monitor the network health, as well as manage devices, and
more easily enforce critical IT controls and policies. SNMP v2c is most commonly deployed, as
it provides better reporting capabilities than SNMP v1. In addition, the GS108T also supports
standards based 802.1ab: Link Layer Discovery Protocol (LLDP). This feature enables discovery
of other devices in the network that support LLDP. The switch also features Link Aggregation
Group (LAG) which allows trunk groups to be created. Finally, the GS108T also features 802.1w
Rapid Spanning Tree (RSTP) which is backward compatible with 802.1d Spanning Tree Protocol.
These ProSafe Smart Switches provide world-class reliability with a Limited Lifetime warranty and
optional ProSupport Maintenance Packages. These switches are optimized for ProSafe Network
Management Software (NMS100) and works with other SNMP-based management software.
To Next Page
Need help?
General
Weight and Dimensions
