Basic Settings
25
R6100 WiFi Router
NETGEAR recommends that you do not change your preset security settings. If you change
your preset security settings, make a note of the new settings and store it in a safe place
where you can easily find it.
If you use a wireless computer to change the wireless network name (SSID) or other wireless
security settings, you are disconnected when you click the
Apply button. To avoid this
problem, use a computer with a wired connection to access the router.
Change the Wireless Security Option
Your router is preset with unique wireless security settings. You can change the settings if
you want. NETGEAR recommends that you do not disable security.
To view or change basic wireless settings:
1. Select BASIC > W
ireless.
The screen sections, settings, and procedures are explained in the following sections.
2. (Optional) Change the settings as needed.
3. Click the Apply button.
Your settings are saved.
If you were connected wirelessly to the router and you changed the SSID or wireless
security
, you are disconnected from the network.
4. If you changed the settings, make sure that you can connect wirelessly to the network with
its new settings.
If you cannot connect wirelessly, check the following:
• Is your computer or wireless device connected to another wireless network in your
area? Some wireless devices automatically connect to the first open network (without
wireless security) that they discover
.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
