NETGEAR R6100 User Manual

45
5
5. USB Storage
Access and Configure a USB Storage Device
This chapter describes how to access and configure a USB storage drive attached to your router.
The USB port on the router can be used to connect only USB storage devices like flash drives or
hard drives. Do not connect computers, USB modems, CD drives, or DVD drives to the router
USB port.
This chapter contains the following sections:
• Connect a USB Storage Device to the Router
• Safely Remove a USB Drive
• Access the USB Storage Device
• Sharing Files
• View a USB Device Attached to the Router
• USB Storage Device Network and Access Settings
• Specify Approved USB Devices
• Media Server Settings
• TiVo Support
For more about ReadySHARE features, visit www.netgear.com/readyshare.

NETGEAR R6100 Specifications

General

Ethernet LAN	Yes
Cabling technology	10/100Base-T(X)
Networking standards	IEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Ethernet LAN data rates	10, 100 Mbit/s
Ethernet LAN interface type	Fast Ethernet
Wi-Fi band	Dual-band (2.4 GHz / 5 GHz)
Wi-Fi standards	802.11a, Wi-Fi 5 (802.11ac), 802.11b, 802.11g, Wi-Fi 4 (802.11n)
Top Wi-Fi standard	Wi-Fi 5 (802.11ac)
WLAN data transfer rate (max)	867 Mbit/s
USB version	2.0
Rack mounting	-
xDSL connection	No
Bandwidth (first)	2.4 GHz
Bandwidth (second)	5 GHz
USB ports quantity	1
WLAN data transfer rates supported	300, 867 Mbit/s
Ethernet LAN (RJ-45) ports	5
Security algorithms	WEP, WPA, WPA2-PSK
Flash memory	128 MB
Cables included	LAN (RJ-45)

Weight and Dimensions

Depth	60 mm
Width	180 mm
Height	170 mm
Weight	322 g