EasyManuals Logo
Home>NETGEAR>Wireless Router>R6100

NETGEAR R6100 User Manual

NETGEAR R6100
122 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #9 background imageLoading...
Page #9 background image
Hardware Setup
9
R6100 WiFi Router
Front and Side Panel
The router front and side panels have the status LEDs and buttons shown in the following
figure.
LEDs
WiFi On/Off button
WPS button
Figure 2. Router front and side view
Table 1. Front panel LED descriptions
LED Description
Power
Solid amber. The router is starting up.
Blinking amber.
The firmware is upgrading, or the Reset button was pressed.
Solid green. The
router is ready.
Blinking green. The
firmware is corrupted. Visit www.netgear.com/support.
Off. Power is not supplied to the router
.
Internet
Solid green. The Internet connection is ready.
Solid amber.
The Ethernet cable connection to the modem has been detected.
Off. No Ethernet cable is connected to the modem.
WiFi
Solid blue. The wireless radio is operating in either 2.4 GHz or 5 GHz mode.
Blinking.
A wireless computer or device is using WPS to join the network.
Off.
The wireless radios are off for both 2.4 GHz and 5 GHz.
USB Solid blue. The router has accepted the USB device. The USB device is ready to be used.
Blinking blue.
A USB device is plugged in and is trying to connect.
Off. No USB device is connected, or someone clicked the Safely Remove Hardware button,
and it is now safe to remove the attached USB device.
The WiFi and WPS buttons toggle the WiFi and WPS functions on and off.

Table of Contents

Other manuals for NETGEAR R6100

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NETGEAR R6100 and is the answer not in the manual?

NETGEAR R6100 Specifications

General IconGeneral
Ethernet LANYes
Cabling technology10/100Base-T(X)
Networking standardsIEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Ethernet LAN data rates10, 100 Mbit/s
Ethernet LAN interface typeFast Ethernet
Wi-Fi bandDual-band (2.4 GHz / 5 GHz)
Wi-Fi standards802.11a, Wi-Fi 5 (802.11ac), 802.11b, 802.11g, Wi-Fi 4 (802.11n)
Top Wi-Fi standardWi-Fi 5 (802.11ac)
WLAN data transfer rate (max)867 Mbit/s
USB version2.0
Rack mounting-
xDSL connectionNo
Bandwidth (first)2.4 GHz
Bandwidth (second)5 GHz
USB ports quantity1
WLAN data transfer rates supported300, 867 Mbit/s
Ethernet LAN (RJ-45) ports5
Security algorithmsWEP, WPA, WPA2-PSK
Flash memory128 MB
Cables includedLAN (RJ-45)
Weight and Dimensions IconWeight and Dimensions
Depth60 mm
Width180 mm
Height170 mm
Weight322 g

Related product manuals