NETGEAR R6100 - Specify Approved USB Devices

USB Storage
53
R6100 WiFi Router
2. Click the Create Network Folder button.
If the Create a Network Folder screen does not display, your web browser might be
blocking pop-ups. If it is, then change the browser settings to allow pop-ups.
3. In the Folder field, browse and select the folder.
4. Fill in the Share Name field.
5. In the Read
Access list and the Write Access list, select the setting that you want.
The user name (account name) for All – no password is guest. The password for admin is
the same one that is used to log in to the router. By default, it is password.
6. Click the Apply button.
The folder is added on the USB device.
 To edit a network folder:
1. Select ADV
ANCED > ReadySHARE.
2. Click the Edit button.
The Edit Network Folder screen displays the same settings shown in the Create a
Network Folder screen.
3. Change the settings in the fields as needed.
4. Click the Apply button.
Your changes are saved.
Specify Approved USB Devices
For more security, you can set up the router to share only approved USB devices.
 To set up approved USB devices:
1. Select ADV
ANCED > Advanced Setup > USB Settings.