EasyManuals Logo

NETGEAR R6100 User Manual

NETGEAR R6100
122 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #35 background imageLoading...
Page #35 background image
Advanced Home Settings
35
R6100 WiFi Router
To change the MTU size:
1. Select ADVANCED > Setup > WAN Setup.
2. In the MTU Size field, enter a value from 64 to 1500.
3. Click the Apply button.
Your change is saved.
LAN Setup
The LAN Setup screen allows configuration of LAN IP services such as Dynamic Host
Configuration Protocol (DHCP) and Routing Information Protocol (RIP).
The router is shipped preconfigured to use private IP addresses on the LAN side and to act
as a DHCP server. The router’s default LAN IP configuration is:
LAN IP address. 192.168.1.1
Subnet mask. 255.255.255.0
These addresses are part of the designated private address range for use in private networks
and are suitable for most applications. If your network requires a different IP addressing
scheme, you can change these settings in the LAN Setup screen.
Note: If you change the LAN IP address of the router while connected
through the browser, you are disconnected. You will have to open a
new connection to the new IP address and log in again.
1472 Maximum size to use for pinging. (Larger packets are fragmented.)
1468 Used in some DHCP environments.
1460 Usable by AOL if you do not have large email attachments, for example.
1436 Used in PPTP environments or with VPN.
1400 Maximum size for AOL DSL.
576 Typical value to connect to dial-up ISPs.
Table 2. Common MTU sizes (continued)
MTU Application

Table of Contents

Other manuals for NETGEAR R6100

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NETGEAR R6100 and is the answer not in the manual?

NETGEAR R6100 Specifications

General IconGeneral
Ethernet LANYes
Cabling technology10/100Base-T(X)
Networking standardsIEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Ethernet LAN data rates10, 100 Mbit/s
Ethernet LAN interface typeFast Ethernet
Wi-Fi bandDual-band (2.4 GHz / 5 GHz)
Wi-Fi standards802.11a, Wi-Fi 5 (802.11ac), 802.11b, 802.11g, Wi-Fi 4 (802.11n)
Top Wi-Fi standardWi-Fi 5 (802.11ac)
WLAN data transfer rate (max)867 Mbit/s
USB version2.0
Rack mounting-
xDSL connectionNo
Bandwidth (first)2.4 GHz
Bandwidth (second)5 GHz
USB ports quantity1
WLAN data transfer rates supported300, 867 Mbit/s
Ethernet LAN (RJ-45) ports5
Security algorithmsWEP, WPA, WPA2-PSK
Flash memory128 MB
Cables includedLAN (RJ-45)
Weight and Dimensions IconWeight and Dimensions
Depth60 mm
Width180 mm
Height170 mm
Weight322 g

Related product manuals