Advanced Settings
95
R6100 WiFi Router
6. (Optional) To refresh the information in the UPnP Portmap Table, click the Refresh
button.
IPv6
You can use this feature to set up an IPv6 Internet connection type if genie does not detect it
automatically.
To set up an IPv6 Internet connection type:
1. Select ADV
ANCED > Advanced Setup > IPv6.
2. In the Internet Connection Type list, select the IPv6 connection type.
Your Internet service provider (ISP) can provide this information.
• If your ISP did not provide details, you can select IPv6 T
unnel.
• If you are not sure, select Auto Detect so that the router detects the IPv6 type that is
in use.
• If your Internet connection does not use PPPoE, DHCP
, or fixed, but is IPv6, select
Auto Config.
For more detailed information about Internet connection types, see the following sections.
3. Click the Apply button.
Your changes take effect.
Requirements for Entering IPv6 Addresses
IPv6 addresses are denoted by eight groups of hexadecimal quartets separated by colons.
Any four-digit group of zeroes within an IPv6 address can be reduced to a single zero or
altogether omitted.
The following errors invalidate an IPv6 address:
• More than eight groups of hexadecimal quartets
• More than four hexadecimal characters in a quartet
• More than two colons in a row
To Next Page
Loading...
Need help?
General
Weight and Dimensions
