To add a VLAN tag group and enable the bridge:
1. Launch a web browser from a computer or WiFi device that is connected to the network.
2. Enter http://www.routerlogin.net.
A login window opens.
3. Enter the router user name and password.
The user name is admin.The default password is password.The user name and password are
case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Advanced Setup > VLAN/Bridge Settings.
The VLAN / Bridge Settings page displays.
5. Select the Enable VLAN/Bridge Group check box.
6. Select the By VLAN tag group radio button.
Manage the WAN and LAN Network Settings
157
Nighthawk AC1900 Smart WiFi Router Model R6900
To Next Page
Loading...
