The BASIC Home page displays.
4. Select Internet.
The Internet Setup page displays.
5. For the Does your Internet connection require a login? setting, select the Yes radio button.
The page adjusts.
6. From the Internet Service Provider menu, select PPPoE as the encapsulation method.
7. In the Login field, enter the login name that your ISP gave you.
This login name is often an email address.
8. In the Password field, type the password that you use to log in to your Internet service.
9. If your ISP requires a service name, type it in the Service Name (if Required) field.
10. From the Connection Mode menu, select Always On, Dial on Demand, or Manually Connect.
11. To change the number of minutes until the Internet login times out, in the Idle Timeout (In minutes)
field, type the number of minutes.
Specify Your Internet Settings
29
Nighthawk AC1900 Smart WiFi Router Model R6900
To Next Page
Loading...
