NETGEAR R6900v2 User Manual

4. Select ADVANCED > USB Functions > ReadySHARE.
The previous figure shows a USB device attached to the router.
5. In the Available Network Folders table, select a device.
If a single device is attached to the USB port, the radio button is selected automatically.
6. Click the Edit button.
7. Change the settings in the fields as needed.
For more information about the settings, see Add a Network Folder on a Storage Device on page 106.
8. Click the Apply button.
Your settings are saved.
9. Click the Close Window button.
The pop-up window closes.
Share a Storage Device Attached to the Router
108
Nighthawk AC1900 Smart WiFi Router Model R6900v2

NETGEAR R6900v2 Specifications

General

WiFi Technology	802.11ac
WiFi Performance	AC1900 (600 + 1300 Mbps)
USB Ports	1 USB 3.0 port
Antenna	3 external antennas
Processor	Dual Core 1GHz
Frequency Band	Dual Band 2.4 GHz / 5 GHz
Memory	128MB Flash, 256MB RAM
Security	Guest Network Access
Dimensions	11.22 x 7.26 x 1.97 inches
Number of Ethernet Ports	5 x 10/100/1000 Mbps Gigabit Ethernet ports (1 WAN & 4 LAN)