NETGEAR R6900v2 User Manual

so that you can access the storage device from outside your local network, for example, when you are not
at home.
To set up FTP access through the Internet:
1. Launch a web browser from a computer or mobile device that is connected to the network.
2. Enter http://www.routerlogin.net.
A login window opens.
3. Enter the router user name and password.
The user name is admin.The default password is password.The user name and password are
case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > USB Functions > ReadySHARE.
The previous figure shows a USB device attached to the router.
5. Select the FTP (via internet) check box.
Admin password protection is enabled by default.
6. Click the Apply button.
Your settings are saved.
7. To limit access to the admin user, do the following:
Manage Dynamic DNS and Access Storage Devices Through the Internet
118
Nighthawk AC1900 Smart WiFi Router Model R6900v2

NETGEAR R6900v2 Specifications

General

WiFi Technology	802.11ac
WiFi Performance	AC1900 (600 + 1300 Mbps)
USB Ports	1 USB 3.0 port
Antenna	3 external antennas
Processor	Dual Core 1GHz
Frequency Band	Dual Band 2.4 GHz / 5 GHz
Memory	128MB Flash, 256MB RAM
Security	Guest Network Access
Dimensions	11.22 x 7.26 x 1.97 inches
Number of Ethernet Ports	5 x 10/100/1000 Mbps Gigabit Ethernet ports (1 WAN & 4 LAN)