NETGEAR R6900v2 User Manual

11
Manage the WAN and LAN Network
Settings
This chapter describes how you can manage the WAN and LAN network settings of the router.
The chapter includes the following sections:
• Manage the WAN Security Settings on page 136
• Set Up a Default DMZ Server on page 136
• Manage IGMP Proxying on page 137
• Manage VPN Pass-Through on page 138
• Manage NAT Filtering on page 138
• Manage the SIP Application-Level Gateway on page 139
• Manage the LAN IP Address Settings on page 139
• Manage the Router Information Protocol Settings on page 141
• Manage the DHCP Server Address Pool on page 141
• Manage Reserved LAN IP Addresses on page 143
• Disable the Built-In DHCP Server on page 145
• Change the Router’s Device Name on page 145
• Set Up and Manage Custom Static Routes on page 146
• Set Up a Bridge for a Port Group or VLAN Tag Group on page 149
135

NETGEAR R6900v2 Specifications

General

WiFi Technology	802.11ac
WiFi Performance	AC1900 (600 + 1300 Mbps)
USB Ports	1 USB 3.0 port
Antenna	3 external antennas
Processor	Dual Core 1GHz
Frequency Band	Dual Band 2.4 GHz / 5 GHz
Memory	128MB Flash, 256MB RAM
Security	Guest Network Access
Dimensions	11.22 x 7.26 x 1.97 inches
Number of Ethernet Ports	5 x 10/100/1000 Mbps Gigabit Ethernet ports (1 WAN & 4 LAN)