NETGEAR R6900v2 User Manual

The user name is admin.The default password is password.The user name and password are
case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Security > Access Control.
The Access Control page displays.
5. Click the View list of allowed devices not currently connected to the network link.
A table displays the detected device name, MAC address, and connection type of the devices that are
not connected but allowed to access the network.
6. To add a device to the allowed list, do the following:
a. Click the Add button.
The Add Allowed Device page displays.
b. Enter the MAC address and device name for the device that you want to allow.
c. On the Add Allowed Device page, click the Apply button.
The device is added to the allowed list on the Access Control page.
7. To remove a device from allowed list, do the following:
a. Select the check box for the device.
b. Click the Delete button.
The device is removed from the allowed list.
8. Click the Apply button.
Your settings are saved.
Control Access to the Internet
62
Nighthawk AC1900 Smart WiFi Router Model R6900v2

NETGEAR R6900v2 Specifications

General

WiFi Technology	802.11ac
WiFi Performance	AC1900 (600 + 1300 Mbps)
USB Ports	1 USB 3.0 port
Antenna	3 external antennas
Processor	Dual Core 1GHz
Frequency Band	Dual Band 2.4 GHz / 5 GHz
Memory	128MB Flash, 256MB RAM
Security	Guest Network Access
Dimensions	11.22 x 7.26 x 1.97 inches
Number of Ethernet Ports	5 x 10/100/1000 Mbps Gigabit Ethernet ports (1 WAN & 4 LAN)