NETGEAR RangeMax WNDA3100 User Manual

NETGEAR RangeMax Dual Band Wireless-N USB Adapter WNDA3100 User Manual
1-3
v1.0, December 2007
What Is in the Box
The product package should contain the following items:
• NETGEAR RangeMax Dual Band Wireless-N USB Adapter WNDA3100
• USB cable and adapter cradle
• Installation Guide for the NETGEAR RangeMax™ Dual Band Wireless-N USB Adapter
WNDA3100
• Resource CD, including:
– Driver and configuration utility software
– NETGEAR RangeMax Dual Band Wireless-N USB Adapter WNDA3100 User Manual
(this document)
– Animated Network Properties Configuration Tutorial
– PC Networking Tutorial
• Warranty and Support information card
If any of the parts are incorrect, missing, or damaged, contact your NETGEAR dealer. Keep the
carton, including the original packing materials, in case you need to return the product for repair.
WNDA3100 Default Wireless Settings
If this is a new wireless network installation, use the factory default settings to set up the network
and verify wireless connectivity. If this is an addition to an existing wireless network, you must
identify the wireless network and wireless security settings that are already defined.
Your RangeMax Dual Band Wireless-N USB Adapter WNDA3100 basic factory default settings
are:
• Network Name Service Set Identification (SSID), Any (First available network)
• Network mode (Infrastructure or Ad-hoc), Infrastructure
• Data security WEP, WPA2-PSK, or WPA-PSK encryption, Disabled
Note: For the RangeMax Dual Band Wireless-N USB Adapter WNDA3100 to
communicate with a wireless access point or wireless adapter, all devices must
be set up to use the same wireless network name (SSID).

NETGEAR RangeMax WNDA3100 Specifications

General

Category	Wireless Adapter
Interface	USB 2.0
Wireless Standards	IEEE 802.11a/b/g/n
Frequency Band	2.4 GHz / 5 GHz
Wireless Data Rates	Up to 300 Mbps
Security	WEP, WPA-PSK, WPA2-PSK
Operating Systems Supported	Windows XP, Windows Vista