NETGEAR RangeMax WNDA3100 User Manual

NETGEAR RangeMax Dual Band Wireless-N USB Adapter WNDA3100 User Manual
1-13
v1.0, December 2007
Removing the WNDA3100 Software
You can remove the wireless adapter software in these two ways:
• Select the Windows Start menu > RangeMax Dual Band Wireless-N USB Adapter
WNDA3100 program group > uninstall option, and then follow the screen prompts.
• Select Windows Start menu >Control Panel > Add or Remove Program, and then select the
RangeMax Dual Band Wireless-N USB Adapter WNDA3100 option, and follow the screen
prompts.
Upgrading the WNDA3100 Software
Upgrades may be available at the NETGEAR website. To install an upgrade, follow these steps.
1. Write down the settings for any profiles that you want to save. They will not be retained.
2. Download the upgrade from the NETGEAR website Support page.
3. Remove the WNDA3100 software from your computer.
4. Remove the WNDA3100 adapter from your computer, and if prompted restart your computer.
5. Run the installer that you downloaded (the file ends in .exe).
6. Follow the installer instructions, and if prompted, restart your computer.

NETGEAR RangeMax WNDA3100 Specifications

General

Category	Wireless Adapter
Interface	USB 2.0
Wireless Standards	IEEE 802.11a/b/g/n
Frequency Band	2.4 GHz / 5 GHz
Wireless Data Rates	Up to 300 Mbps
Security	WEP, WPA-PSK, WPA2-PSK
Operating Systems Supported	Windows XP, Windows Vista