NETGEAR RAX9 - Page 11

Table 1. LED descriptions (Continued)
DescriptionLED Icon
•
Solid green: The router is broadcasting a WiFi signal. You can connect to the router’s
WiFi network.
•
Off: The router is not broadcasting a WiFi signal. You cannot use WiFi to connect to
the router.
3: WiFi LED
•
Solid green: The router detected a 1 Gbps link with a device that is connected to one
of the router’s Ethernet ports.
•
Solid Amber: The router detected a 10/100 Mbps link with a device that is connected
to one of the router’s Ethernet ports.
•
Blinking green: One of the router’s Ethernet ports is sending or receiving traffic at 1
Gbps.
•
Blinking amber: One of the router’s Ethernet ports is sending or receiving traffic at
10/100 Mbps.
•
Off: No devices are connected to the router’s Ethernet ports.
4: Ethernet LAN LED
User Manual11Hardware Setup
4-Stream AX1800 WiFi 6 Router Model RAX9 and Model R6600AX