NETGEAR RAX9 - Manage Reserved LAN IP Addresses; Reserve an IP Address

The BASIC Home page displays.
4. Select ADVANCED > Advanced Setup > Dynamic DNS.
The Dynamic DNS page displays.
5. Change your Dynamic DNS account settings as necessary.
6. Click the Apply button.
Your settings are saved.
Manage reserved LAN IP addresses
When you specify a reserved IP address for a device on the LAN, that device always
receives the same IP address each time it requests an IP address from the router's DHCP
server (for example, when the device restarts). Assign reserved IP addresses to devices
or servers that require permanent IP settings.
Reserve an IP address
To reserve an IP address:
1. Launch a web browser from a computer or mobile device that is connected to the
router network.
2. Enter http://www.routerlogin.net.
A login window displays.
3. Enter the router admin user name and password.
The user name is admin. The password is the one that you specified when you set
up your router. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Setup > LAN Setup.
The LAN Setup page displays.
5. In the Address Reservation section, click the Add button.
The Address Reservation page displays.
6. To reserve the IP address for a device that the router detects automatically, in the
Address Reservation Table, select the radio button for the device.
7. To manually reserve an IP address for a device, do the following:
a. In the IP Address field, type the IP address to assign to the device.
User Manual94Manage the WAN and LAN
Network Settings
4-Stream AX1800 WiFi 6 Router Model RAX9 and Model R6600AX