7. Edit the route information.
8. Click the Apply button.
Your settings are saved.
Delete a static route
To delete a static route:
1. Launch a web browser from a computer or mobile device that is connected to the
router network.
2. Enter http://www.routerlogin.net.
A login window displays.
3. Enter the router admin user name and password.
The user name is admin. The password is the one that you specified when you set
up your router. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Advanced Setup > Static Routes.
The Static Routes page displays.
5. In the table, select the radio button for the route.
6. Click the Delete button.
The route is removed from the table.
Set up an IPTV port or a bridge for
a port group or VLAN tag group
If you subscribe to an Internet Protocol television (IPTV) service (a TV streaming service)
and your IPTV service requires an intranet address, you can set up an IPTV port.
Some devices, such as an IPTV, cannot function behind the router’s network address
translation (NAT) service or firewall. For example, an IPTV port might require an IP
address within the Internet service provider’s (ISP’s) network (also called an ISP intranet
address).
The way you set up an IPTV port is by creating a bridge connection from the router’s
Internet port to the LAN port to which the IPTV device is connected. When IPTV is
connected through WiFi, the router must also support a bridge connection from the
User Manual99Manage the WAN and LAN
Network Settings
4-Stream AX1800 WiFi 6 Router Model RAX9 and Model R6600AX
To Next Page
Loading...
