NETGEAR RAX9 - Remove a Port Triggering Rule

The Port Forwarding / Port Triggering page displays.
5. Select the Port Triggering radio button.
The port triggering settings display.
6. In the Port Triggering Portmap Table, select the radio button for the rule.
7. Click the Edit Service button.
The Port Triggering Services page displays.
8. Change the settings.
For information about the settings, see Add a port triggering rule on page 151.
9. Click the Apply button.
Your settings are saved. The changed rule displays in the Port Triggering Portmap
Table on the Port Forwarding / Port Triggering page.
Remove a port triggering rule
You can remove a port triggering rule that you no longer need.
To remove a port triggering rule:
1. Launch a web browser from a computer or mobile device that is connected to the
router network.
2. Enter http://www.routerlogin.net.
A login window displays.
3. Enter the router admin user name and password.
The user name is admin. The password is the one that you specified when you set
up your router. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Advanced Setup > Port Forwarding / Port Triggering.
The Port Forwarding / Port Triggering page displays.
5. Select the Port Triggering radio button.
The port triggering settings display.
6. In the Port Triggering Portmap Table, select the radio button for the rule.
7. Click the Delete Service button.
Your settings are saved. The rule is removed from the Port Triggering Portmap Table.
User Manual153Manage Port Forwarding and
Port Triggering
4-Stream AX1800 WiFi 6 Router Model RAX9 and Model R6600AX