devices to function at up to 866 Mbps. This mode is the default mode if AX WiFi
is disabled.
7. Click the Apply button.
Your settings are saved.
Change the 2.4 GHz or 5 GHz WiFi
channel
You can change the 2.4 GHz or 5 GHz WiFi channel.
In some regions, not all channels are available. Do not change the channel unless you
experience interference (shown by lost connections or slow data transfers). If this
happens, experiment with different channels to see which is the best.
When you use multiple access points, it is better if adjacent access points use different
channels to reduce interference. The recommended channel spacing between adjacent
access points is four channels (for example, for the 2.4 GHz radio, use channels 1 and
5, or 6 and 10).
NOTE: If you change the 2.4 GHz or 5 GHz channel, the change also applies to
the guest network.
To change the WiFi channel:
1. Launch a web browser from a computer or mobile device that is connected to the
router network.
2. Enter http://www.routerlogin.net.
A login window displays.
3. Enter the router admin user name and password.
The user name is admin. The password is the one that you specified when you set
up your router. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select Wireless.
The Wireless Settings page displays.
5. To change the 2.4 GHz or 5 GHz WiFi channel, select a channel number from the
Channel menu in the Wireless Network (2.4 GHz b/g/n/ax) section, Wireless Network
(5 GHz a/n/ac/ax) section, or in both sections.
6. Click the Apply button.
Your settings are saved.
User Manual71Manage WiFi Settings
4-Stream AX1800 WiFi 6 Router Model RAX9 and Model R6600AX
To Next Page
Loading...
