Your settings are saved.
Enable or disable Smart Connect
Smart Connect selects the fastest WiFi band for your router. For Smart Connect to work,
the 2.4 GHz and 5 GHz bands must use the same WiFi network name (SSID) and network
key (password). That means that when you connect to the router with WiFi, you see only
one SSID that connects to both bands.
NOTE: If you enable Smart Connect and the SSID and passwords for the 2.4
GHz and 5 GHz bands do not match, the WiFi settings for the 2.4 GHz band
overwrite the WiFi settings for the 5 GHz band.
To enable or disable Smart Connect:
1. Launch a web browser from a computer or mobile device that is connected to the
router network.
2. Enter http://www.routerlogin.net.
A login window displays.
3. Enter the router admin user name and password.
The user name is admin. The password is the one that you specified when you set
up your router. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select Wireless.
The Wireless Settings page displays.
5. Select or clear the Enable Smart Connect check box.
Selecting this check box enables Smart Connect and clearing this check box disables
Smart Connect (the default setting).
6. Click the Apply button.
Your settings are saved.
Enable or disable 20/40 MHz
coexistence for the 2.4 GHz radio
20/40 coexistence allows a 20 MHz and 40 MHz channel width to be supported
simultaneously. By default, 20/40 MHz coexistence is enabled on the 2.4 GHz radio to
User Manual67Manage WiFi Settings
4-Stream AX1800 WiFi 6 Router Model RAX9 and Model R6600AX
To Next Page
Loading...
