NETGEAR RBK20 User Manual

The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4.
Select Attached Devices.
The Attached Devices page displays.
5. Select your satellite.
The Edit Device page displays.
6.
Make sure that the LED On/Off slider is set to ON.
7.
If the LED lighting is turned off, click the LED On/Off slider to turn the LED on.
The top and bottom Light LEDs turn on.
8.
Select an LED lighting brightness percentage from the LED Lighting Brightness
menu.
9.
Click the APPLY button.
Your settings are saved.
Schedule When to Turn On LED Lighting
You can schedule when to turn on the satellite’s LED lighting:
To schedule the LED lighting:
1.
Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2.
Enter orbilogin.com.
A login window opens.
3. Enter the router admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4.
Select Attached Devices.
The Attached Devices page displays.
5. Select your satellite.
The Edit Device page displays.
6.
Make sure that the LED On/Off slider is set to ON.
User Manual111Manage Your Network
Orbi WiFi System

NETGEAR RBK20 Specifications

General

Brand	NETGEAR
Model	RBK20
Category	Network Router
Language	English