Use Remote Access
To use remote access:
1. Launch a web browser on a computer that is not on your home network.
2.
Type your router’s WAN IP address into your browser’s address or location field
followed by a colon (:) and the custom port number.
For example, if your external address is 134.177.0.123 and you use port number
8080, enter http://134.177.0.123:8080 in your browser.
Remotely Access Your Router Using the
genie App
You can use the genie app to remotely access your router and change its settings. Before
you can use remote access with the genie app, you must update your router’s firmware
and download the latest genie app for your computer or mobile device. Remote access
with the genie app is supported for Windows computers, iOS mobile devices, and
Android mobile devices.
For more information about how to update your router’s firmware, see Update the
Router and Satellite Firmware on page 96.
To download the latest genie app for your computer or mobile device, visit
NETGEAR.com/genie. For more information about how to set up remote access using
the genie app, see the genie app user manual, which is available at
downloadcenter.netgear.com/.
User Manual117Manage Your Network
Orbi WiFi System
To Next Page
Loading...
Need help?
General
