NETGEAR RBK20 User Manual

Table 6. Factory default settings for the router (Continued)
Default SettingFeature
EnabledWiFi communicationWiFi
See router labelSSID name
WPA2-PSK (AES)Security
EnabledBroadcast SSID
Auto
3
Transmission speed
United States in the US;
otherwise, varies by region
Country/region
2.4 GHz front and back
haul: Auto
5 GHz front haul:
•
Channel 48 for NA, PR,
AU, CA, and TW
•
Channel 36 for EU, KO,
JP, and IN
5 GHz back haul:
•
Channel 157 for NA, PR,
AU, CA, and TW
•
Channel 108 for EU, KO,
JP, and IN
RF channel
3
Maximum wireless signal rate derived from IEEE Standard 802.11 specifications. Actual throughput can vary. Network
conditions and environmental factors, including volume of network traffic, building materials and construction, and
network overhead, lower actual data throughput rate.
Factory Settings for Orbi Satellites
You can return the satellite to its factory settings. Use the end of a paper clip or a similar
object to press and hold the Reset button on the back of the satellite for at least seven
seconds. The satellite resets, and returns to the factory settings.
Factory Settings for Orbi Satellite Model RBS50
The following table shows the factory default settings for the satellite.
User Manual155Supplemental Information
Orbi WiFi System

NETGEAR RBK20 Specifications

General

Brand	NETGEAR
Model	RBK20
Category	Network Router
Language	English