connected. If both networks use the same LAN IP scheme, when the VPN tunnel is
established, you cannot access your home router or your home network with the
OpenVPN software.
The default LAN IP address scheme for the router is 192.x.x.x.The most common IP
schemes are 192.x.x.x, 172.x.x.x, and 10.x.x.x. If you experience a conflict, change the
IP scheme either for your home network or for the network with the client VPN computer.
For information about changing these settings, see Change the LAN TCP/IP Settings
on page 75.
To open a VPN tunnel:
1. Launch the OpenVPN application with administrator privileges.
Figure 18. The OpenVPN icon displays in the Windows taskbar.
TIP: You can create a shortcut to the VPN program, then use the shortcut to access
the settings and select the run as administrator check box. Then every time you
use this shortcut, OpenVPN automatically runs with administrator privileges.
2.
Right-click the OpenVPN icon.
3.
Select Connect.
The VPN connection is established. You can launch a web browser and log in to your
router.
User Manual135Use VPN to Access Your Network
Orbi WiFi System
To Next Page
Loading...
Need help?
General
