Need help?Do you have a question about the NETGEAR ReadyNAS 2120 and is the answer not in the manual?
General| Processor cores | 2 |
|---|---|
| Processor model | - |
| Processor family | Marvell |
| Processor frequency | 1.2 GHz |
| Number of processors installed | 1 |
| RAID levels | 0, 1, 5, 6, 10, JBOD |
| Storage drive size | 2.5/3.5 \ |
| Hot-swap drive bays | Yes |
| Storage drive capacity | 1000 GB |
| Supported file systems | ext3, ext4, FAT32, HFS+, NTFS |
| Storage drive interface | Serial ATA |
| Total installed storage capacity | 4 TB |
| Maximum supported storage capacity | 16 TB |
| Number of storage drives installed | 4 |
| Flash memory | 128 MB |
| Internal memory | 2 GB |
| Internal memory type | DDR3 |
| Wi-Fi | No |
| Cabling technology | 10/100/1000Base-T(X) |
| Ethernet LAN data rates | 10, 100, 1000 Mbit/s |
| Fiber ports quantity | 0 |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Noise level | 28 dB |
| Number of users | 8192 user(s) |
| Security algorithms | 256-bit AES |
| Chassis type | Rack (1U) |
| Product color | Black |
| Number of fans | 3 fan(s) |
| AC input voltage | 100-240 V |
| AC input frequency | 50 - 60 Hz |
| Operating temperature (T-T) | 0 - 40 °C |
| Storage relative humidity (H-H) | 5 - 95 % |
| Certification | FCC Class B, CE Class B, RoHS, VCCI Class B |
Weight and Dimensions| Depth | 308 mm |
|---|---|
| Width | 430 mm |
| Height | 44 mm |
| Weight | 7480 g |
Explains the meaning of system status LEDs on the front and rear panels.
Describes how to power the system on, preferred and forced shutdown.
Explains the meaning of system status LEDs.
Describes power on, shut down, and power state behavior.
Explains the meaning of system status LEDs.
Describes power on, shut down, and power state behavior.
Explains the different system boot modes and access methods.
Describes power on, shut down, and power state behavior.
Explains the different system boot modes and access methods.
Explains the meaning of system status LEDs.
Explains the different system boot modes and access methods.
Step-by-step guide to installing new hard drives or SSDs.
Procedure for replacing failed or old disks in the system.
Guidelines for safe electrical handling and connections.
General safety advice for operating and maintaining the system.
Measures to protect against static discharge damage to components.
To Next Page