NETGEAR ReadyNAS 2120

4. Press and hold the Reset button, releasing after about one second, to scroll through the boot menu
modes.
The storage system shows the boot mode options using the LEDs, as described in the following table:
Status IndicatorBoot Mode
Power
LED
UI LEDHealth
LED
Description
Power, UI, and Health LEDs blink.Boot menu
Health LED lights.Normal
UI LED lights.Factory default
UI and Health LEDs light.OS reinstall
Power LED lights.Tech support
Power and Health LEDs light.Volume read only
Power and UI LEDs light.Memory test
Power, UI, and Health LEDs light.Test disk
Legend:
•
Solid:
•
Blinking:
•
Off:
5. Press and hold the Reset button for four seconds to confirm your boot menu selection.
The system boots in the selected boot mode.
If you do not hold the Reset button long enough, the press moves the system to the
next selection. Repeat the press and hold for one second to scroll through to your
desired selection.
Note
Rack Mounting
You can rack-mount the ReadyNAS 2304 using the included rack-mount ears.
Alternatively, you can use the optional sliding rail kit, order number RRAIL04-10000S. For instructions see
the 1U Rail Installation Guide, which is available at http://support.netgear.com/product/ReadyNAS-OS6.
ReadyNAS 2304
25
ReadyNAS OS 6