The disk tray is secured in the drive bay.
9. If necessary, turn on your system by pressing the Power button.
If the disk that you added was not previously formatted, the system uses the disk in one of the following
ways:
• If you are adding the disk to a system that uses X-RAID, the system automatically determines whether
the disk is used for protection or storage. The new disk is incorporated in the background while you
continue to use your system.
• If you are adding the disk to a system that uses Flex-RAID, the disk becomes available for use.You
use the local admin page to manually configure the new disk.
For more information about X-RAID, Flex-RAID, and using the local admin page, see the ReadyNAS
OS 6 Software Manual, which is available at http://support.netgear.com/product/ReadyNAS-OS6.
Disks
77
ReadyNAS OS 6
To Next Page
Loading...
