NETGEAR WAC120

Monitoring
56
802.11ac Wireless Access Point Model WAC120
View System Information
You can view a summary of the current access point configuration settings, including current
IP settings and current wireless settings. This information is read-only, so any changes must
be made on other screens.
 To view system information:
1. Launch a web browser on the computer that is connected to the acc
ess point.
2. Enter http://192.168.0.
100 in the address field of the browser.
A login prompt displays.
3. Enter the user name and password.
The us
er name is admi
n and the default password is password.
The General screen displays.
4. Select Monitoring > System.
The following access point information displays:
• Access Point Name.
The NetBIOS name. The default name can be changed.
• Ethernet MAC Address. The MAC address of the a
ccess point’s Ethernet port.
• Wireless MAC Address for 2.4 GHz. The MAC a
ddress of the access point’s 2.4
GHz wireless port.