NETGEAR WAC120

Initial Setup
17
802.11ac Wireless Access Point Model WAC120
Set Up and Test Wireless Connectivity
This section covers the following topics:
• Basic Wireless Settings
• Wireless On-Off Schedule
• Wireless Security Options
• Wireless Security Profiles
• MAC Authentication
• Connect Stations to the Wireless Access Point
You must use a computer that is configured with a static IP addre
ss of 192
.168.0.210 and a
subnet mask of 255.255.255.0. During initial setup, use a wired Ethernet connection from the
computer to the access point.
Basic Wireless Settings
 To configure the basic wireless settings:
1. Launch a web browser on the computer that is connected to the access point.
2. Enter http://1
92.168.0.100 in the address field of the browser.
A login prompt displays.
3. Enter the user name and password.
The user name is
admin and t
he default password is password.
The General screen displays.
4. Select Configuration > System.
5. Verify that the correct country or region is selected.
6. If you changed the setting, click the Appl
y button.
Your settings are saved.